Dacor Propane (lp) Conversion Kit For Er48ds 48 Range (10 Orifices)

October 8, 2017 · Posted in dacor · Comments Off 
Dacor Propane (lp) Conversion Kit For Er48ds 48 Range (10 Orifices)

Dacor Propane (lp) Conversion Kit For Er48ds 48 Range (10 Orifices)

Dacor Propane (lp) Conversion Kit For Er48ds 48 Range (10 Orifices)

The DCS model# ER48DS range is a 48 range with fired top side burners and two electric ovens below. Four burners have inner and outer burner rings; the inner is used for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 3 distinctly sized burners on this unit and 4 of them have low intensity and high intensity burner functions. The large burners and the small burners are the ones with a simmer function, while the mid sized burners DO NOT have a simmer function. DCS rates the burners at 18,000 BTU, 16,000 BTU and 8,500 BTU. The propane output pressure at the regulator is rated at 10 W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices for the standard burners will be bored as follows: large burners #56, medium burners #58, and small burners #70. The 2 large 18,000 BTU burners have small simmer burner rings at their centers and the 2 small 8,500 BTU burners also have small simmer burner rings at their centers. The small simmer burners produce approximately 1,700 BTU and 2,000 BTU each, so the size of each orifice is #78 and #77 respectively. The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. The item “DACOR PROPANE (LP) CONVERSION KIT FOR ER48DS 48 RANGE (10 ORIFICES)” is in sale since Friday, October 06, 2017. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Dacor
  • Type: Orifice
  • MPN: Does Not Apply

Dacor Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

September 6, 2017 · Posted in dacor · Comments Off 
Dacor Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

Dacor Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

Dacor Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

The DCS model# ER48DS range is a 48 range with fired top side burners and two electric ovens below. Four burners have inner and outer burner rings; the inner is used for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 3 distinctly sized burners on this unit and 4 of them have low intensity and high intensity burner functions. The large burners and the small burners are the ones with a simmer function, while the mid sized burners DO NOT have a simmer function. DCS rates the burners at 18,000 BTU, 16,000 BTU and 8,500 BTU. The propane output pressure at the regulator is rated at 10 W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices for the standard burners will be bored as follows: large burners #56, medium burners #58, and small burners #70. The 2 large 18,000 BTU burners have small simmer burner rings at their centers and the 2 small 8,500 BTU burners also have small simmer burner rings at their centers. The small simmer burners produce approximately 1,700 BTU and 2,000 BTU each, so the size of each orifice is #78 and #77 respectively. The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. The item “DACOR PROPANE CONVERSION KIT FOR ER48DS 48 RANGE (10 ORIFICES)” is in sale since Wednesday, September 06, 2017. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Dacor
  • Type: Orifice
  • MPN: Does Not Apply

Dacor Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

August 20, 2017 · Posted in dacor · Comments Off 
Dacor Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

Dacor Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

Dacor Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

The DCS model# ER48DS range is a 48 range with fired top side burners and two electric ovens below. Four burners have inner and outer burner rings; the inner is used for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 3 distinctly sized burners on this unit and 4 of them have low intensity and high intensity burner functions. The large burners and the small burners are the ones with a simmer function, while the mid sized burners DO NOT have a simmer function. DCS rates the burners at 18,000 BTU, 16,000 BTU and 8,500 BTU. The propane output pressure at the regulator is rated at 10 W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices for the standard burners will be bored as follows: large burners #56, medium burners #58, and small burners #70. The 2 large 18,000 BTU burners have small simmer burner rings at their centers and the 2 small 8,500 BTU burners also have small simmer burner rings at their centers. The small simmer burners produce approximately 1,700 BTU and 2,000 BTU each, so the size of each orifice is #78 and #77 respectively. The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. The item “DACOR PROPANE CONVERSION KIT FOR ER48DS 48 RANGE (10 ORIFICES)” is in sale since Sunday, August 06, 2017. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Dacor
  • Type: Orifice
  • MPN: Does Not Apply

Dacor Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

July 18, 2017 · Posted in dacor · Comments Off 
Dacor Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

Dacor Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

Dacor Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

The DCS model# ER48DS range is a 48 range with fired top side burners and two electric ovens below. Four burners have inner and outer burner rings; the inner is used for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 3 distinctly sized burners on this unit and 4 of them have low intensity and high intensity burner functions. The large burners and the small burners are the ones with a simmer function, while the mid sized burners DO NOT have a simmer function. DCS rates the burners at 18,000 BTU, 16,000 BTU and 8,500 BTU. The propane output pressure at the regulator is rated at 10 W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices for the standard burners will be bored as follows: large burners #56, medium burners #58, and small burners #70. The 2 large 18,000 BTU burners have small simmer burner rings at their centers and the 2 small 8,500 BTU burners also have small simmer burner rings at their centers. The small simmer burners produce approximately 1,700 BTU and 2,000 BTU each, so the size of each orifice is #78 and #77 respectively. The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. The item “DACOR PROPANE CONVERSION KIT FOR ER48DS 48 RANGE (10 ORIFICES)” is in sale since Tuesday, July 04, 2017. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.
  • Brand: Dacor
  • Type: Orifice
  • MPN: Does Not Apply

Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

April 1, 2017 · Posted in propane · Comments Off 
Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

The DCS model# ER48DS range is a 48 range with fired top side burners and two electric ovens below. Four burners have inner and outer burner rings; the inner is used for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 3 distinctly sized burners on this unit and 4 of them have low intensity and high intensity burner functions. The large burners and the small burners are the ones with a simmer function, while the mid sized burners DO NOT have a simmer function. DCS rates the burners at 18,000 BTU, 16,000 BTU and 8,500 BTU. The propane output pressure at the regulator is rated at 10 W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices for the standard burners will be bored as follows: large burners #56, medium burners #58, and small burners #70. The 2 large 18,000 BTU burners have small simmer burner rings at their centers and the 2 small 8,500 BTU burners also have small simmer burner rings at their centers. The small simmer burners produce approximately 1,700 BTU and 2,000 BTU each, so the size of each orifice is #78 and #77 respectively. The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. The item “DCS PROPANE CONVERSION KIT FOR ER48DS 48 RANGE (10 ORIFICES)” is in sale since Saturday, April 01, 2017. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, BR, CL, CO, CR, DO, PA, TT, GT, SV, HN, JM.
  • Brand: DCS
  • Type: Orifice
  • MPN: Does Not Apply

Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

January 29, 2017 · Posted in propane · Comments Off 
Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

The DCS model# ER48DS range is a 48 range with fired top side burners and two electric ovens below. Four burners have inner and outer burner rings; the inner is used for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 3 distinctly sized burners on this unit and 4 of them have low intensity and high intensity burner functions. The large burners and the small burners are the ones with a simmer function, while the mid sized burners DO NOT have a simmer function. DCS rates the burners at 18,000 BTU, 16,000 BTU and 8,500 BTU. The propane output pressure at the regulator is rated at 10 W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices for the standard burners will be bored as follows: large burners #56, medium burners #58, and small burners #70. The 2 large 18,000 BTU burners have small simmer burner rings at their centers and the 2 small 8,500 BTU burners also have small simmer burner rings at their centers. The small simmer burners produce approximately 1,700 BTU and 2,000 BTU each, so the size of each orifice is #78 and #77 respectively. The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. The item “DCS PROPANE CONVERSION KIT FOR ER48DS 48 RANGE (10 ORIFICES)” is in sale since Saturday, January 28, 2017. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, BR, CL, CO, CR, DO, PA, TT, GT, SV, HN, JM.
  • Brand: DCS
  • Type: Orifice
  • MPN: Does Not Apply

Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

January 22, 2017 · Posted in propane · Comments Off 
Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

The DCS model# ER48DS range is a 48 range with fired top side burners and two electric ovens below. Four burners have inner and outer burner rings; the inner is used for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 3 distinctly sized burners on this unit and 4 of them have low intensity and high intensity burner functions. The large burners and the small burners are the ones with a simmer function, while the mid sized burners DO NOT have a simmer function. DCS rates the burners at 18,000 BTU, 16,000 BTU and 8,500 BTU. The propane output pressure at the regulator is rated at 10 W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices for the standard burners will be bored as follows: large burners #56, medium burners #58, and small burners #70. The 2 large 18,000 BTU burners have small simmer burner rings at their centers and the 2 small 8,500 BTU burners also have small simmer burner rings at their centers. The small simmer burners produce approximately 1,700 BTU and 2,000 BTU each, so the size of each orifice is #78 and #77 respectively. The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. The item “DCS PROPANE CONVERSION KIT FOR ER48DS 48 RANGE (10 ORIFICES)” is in sale since Thursday, December 29, 2016. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, BR, CL, CO, CR, DO, PA, TT, GT, SV, HN, JM.
  • Brand: DCS
  • Type: Orifice
  • MPN: Does Not Apply

Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

October 29, 2016 · Posted in propane · Comments Off 
Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

The DCS model# ER48DS range is a 48 range with fired top side burners and two electric ovens below. Four burners have inner and outer burner rings; the inner is used for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 3 distinctly sized burners on this unit and 4 of them have low intensity and high intensity burner functions. The large burners and the small burners are the ones with a simmer function, while the mid sized burners DO NOT have a simmer function. DCS rates the burners at 18,000 BTU, 16,000 BTU and 8,500 BTU. The propane output pressure at the regulator is rated at 10 W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices for the standard burners will be bored as follows: large burners #56, medium burners #58, and small burners #70. The 2 large 18,000 BTU burners have small simmer burner rings at their centers and the 2 small 8,500 BTU burners also have small simmer burner rings at their centers. The small simmer burners produce approximately 1,700 BTU and 2,000 BTU each, so the size of each orifice is #78 and #77 respectively. The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. The item “DCS PROPANE CONVERSION KIT FOR ER48DS 48 RANGE (10 ORIFICES)” is in sale since Saturday, October 29, 2016. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, BR, CL, CO, CR, DO, PA, TT, GT, SV, HN, JM.
  • Brand: DCS
  • Type: Orifice
  • MPN: Does Not Apply

Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

September 29, 2016 · Posted in propane · Comments Off 
Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

The DCS model# ER48DS range is a 48 range with fired top side burners and two electric ovens below. Four burners have inner and outer burner rings; the inner is used for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 3 distinctly sized burners on this unit and 4 of them have low intensity and high intensity burner functions. The large burners and the small burners are the ones with a simmer function, while the mid sized burners DO NOT have a simmer function. DCS rates the burners at 18,000 BTU, 16,000 BTU and 8,500 BTU. The propane output pressure at the regulator is rated at 10 W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices for the standard burners will be bored as follows: large burners #56, medium burners #58, and small burners #70. The 2 large 18,000 BTU burners have small simmer burner rings at their centers and the 2 small 8,500 BTU burners also have small simmer burner rings at their centers. The small simmer burners produce approximately 1,700 BTU and 2,000 BTU each, so the size of each orifice is #78 and #77 respectively. The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. The item “DCS PROPANE CONVERSION KIT FOR ER48DS 48 RANGE (10 ORIFICES)” is in sale since Thursday, September 29, 2016. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, BR, CL, CO, CR, DO, PA, TT, GT, SV, HN, JM.
  • Brand: DCS
  • Type: Orifice
  • MPN: Does Not Apply

Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

August 30, 2016 · Posted in propane · Comments Off 
Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)

The DCS model# ER48DS range is a 48 range with fired top side burners and two electric ovens below. Four burners have inner and outer burner rings; the inner is used for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 3 distinctly sized burners on this unit and 4 of them have low intensity and high intensity burner functions. The large burners and the small burners are the ones with a simmer function, while the mid sized burners DO NOT have a simmer function. DCS rates the burners at 18,000 BTU, 16,000 BTU and 8,500 BTU. The propane output pressure at the regulator is rated at 10 W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices for the standard burners will be bored as follows: large burners #56, medium burners #58, and small burners #70. The 2 large 18,000 BTU burners have small simmer burner rings at their centers and the 2 small 8,500 BTU burners also have small simmer burner rings at their centers. The small simmer burners produce approximately 1,700 BTU and 2,000 BTU each, so the size of each orifice is #78 and #77 respectively. The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. The item “DCS PROPANE CONVERSION KIT FOR ER48DS 48 RANGE (10 ORIFICES)” is in sale since Tuesday, August 30, 2016. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, BR, CL, CO, CR, DO, PA, TT, GT, SV, HN, JM.
  • Brand: DCS
  • Type: Orifice
  • MPN: Does Not Apply

Next Page »