Dacor Propane (lp) Conversion Kit For Dyrp48ds/ng Range (orifices And Jets)
December 13, 2018 · Posted in dacor · Comments Off
The DCS model# DYRP48 range is a 48 range with 6 fired top side burners and a single electric oven below. These units have an extreme precision specialty burners with that use two orifices each to tailor the cook flame on extra low for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 2 distinctly sized burners (2 of one type at the front left and front right, and 4 of the other type) that requires 4 distinct types of precision machined orifices, such as the ones in this kit. DCS rates the burners at 18,000 BTU and 15,000 BTU. The propane output pressure at the regulator is rated at 10 W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices included as follows for the high flame function: two #56 (for the high side of the larger front left and front right burners), two #82 (for the low flame of the larger front left and front right burners), four #58 (for high flame on the 4 smaller burners) and four #77 (for the low flame function of the 4 smaller burners). The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads and they are custom made AND TUNED just for this unit. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. The item “DACOR PROPANE (LP) CONVERSION KIT FOR DYRP48DS/NG RANGE (ORIFICES AND JETS)” is in sale since Thursday, December 13, 2018. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.
- Model: DYRP48
- Type: Orifice
- MPN: Does Not Apply
- Brand: Dacor
- Suitable For: Range
SPECIAL LISTING DACOR PROPANE CONVERSION KIT FOR DYRTP48 WithLP REGULATOR
December 5, 2018 · Posted in special · Comments Off
THE FUEL REGULATOR INCLUDED WITH THIS KIT IS SPECIFICALLY FOR PROPANE (LP) AND IS ADJUSTABLE FROM 5″WC TO 12″WC. IT MUST BE ADJUSTED TO 10WC IN ORDER FOR THIS CONVERSION KIT TO WORK AS DESIGNED. The DCS model# DYRP48 range is a 48 range with 6 fired top side burners and a single electric oven below. These units have an extreme precision specialty burners with that use two orifices each to tailor the cook flame on extra low for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 2 distinctly sized burners (2 of one type at the front left and front right, and 4 of the other type) that requires 4 distinct types of precision machined orifices, such as the ones in this kit. DCS rates the burners at 18,000 BTU and 15,000 BTU. The propane output pressure at the regulator is rated at 10 W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices included as follows for the high flame function: two #56 (for the high side of the larger front left and front right burners), two #82 (for the low flame of the larger front left and front right burners), four #58 (for high flame on the 4 smaller burners) and four #77 (for the low flame function of the 4 smaller burners). The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads and they are custom made AND TUNED just for this unit. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. The item “SPECIAL LISTING DACOR PROPANE CONVERSION KIT FOR DYRTP48 WithLP REGULATOR” is in sale since Wednesday, December 5, 2018. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.
- Brand: Dacor
- Type: Orifice
- MPN: Does Not Apply
Dacor Propane Conversion Kit For Dyrp48 Range (12 Orifices)
December 5, 2018 · Posted in dacor · Comments Off
The DCS model# DYRP48 range is a 48 range with 6 fired top side burners and a single electric oven below. These units have an extreme precision specialty burners with that use two orifices each to tailor the cook flame on extra low for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 2 distinctly sized burners (2 of one type at the front left and front right, and 4 of the other type) that requires 4 distinct types of precision machined orifices, such as the ones in this kit. DCS rates the burners at 18,000 BTU and 15,000 BTU. The propane output pressure at the regulator is rated at 10 W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices included as follows for the high flame function: two #56 (for the high side of the larger front left and front right burners), two #82 (for the low flame of the larger front left and front right burners), four #58 (for high flame on the 4 smaller burners) and four #77 (for the low flame function of the 4 smaller burners). The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads and they are custom made AND TUNED just for this unit. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. The item “DACOR PROPANE CONVERSION KIT FOR DYRP48 RANGE (12 ORIFICES)” is in sale since Tuesday, December 4, 2018. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.
- Brand: Dacor
- Type: Orifice
- MPN: Does Not Apply
Dacor Propane Conversion Kit For Dyrtp48 Range (12 Orifices)
December 5, 2018 · Posted in dacor · Comments Off
The DCS model# DYRP48 range is a 48 range with 6 fired top side burners and a single electric oven below. These units have an extreme precision specialty burners with that use two orifices each to tailor the cook flame on extra low for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 2 distinctly sized burners (2 of one type at the front left and front right, and 4 of the other type) that requires 4 distinct types of precision machined orifices, such as the ones in this kit. DCS rates the burners at 18,000 BTU and 15,000 BTU. The propane output pressure at the regulator is rated at 10 W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices included as follows for the high flame function: two #56 (for the high side of the larger front left and front right burners), two #82 (for the low flame of the larger front left and front right burners), four #58 (for high flame on the 4 smaller burners) and four #77 (for the low flame function of the 4 smaller burners). The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads and they are custom made AND TUNED just for this unit. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. The item “DACOR PROPANE CONVERSION KIT FOR DYRTP48 RANGE (12 ORIFICES)” is in sale since Tuesday, December 4, 2018. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.
- Brand: Dacor
- Type: Orifice
- MPN: Does Not Apply
Dacor Propane (lp) Conversion Kit For Er36dsch Range (12 Orifices)
November 13, 2018 · Posted in dacor · Comments Off
This kit is intended to specifically convert the DCS model# ER36DSCH range from Natural Gas to Propane (LP). This is a 36 range with fired top side burners and a single electric oven below. These units have an extreme precision specialty burners with that use two orifices each to tailor the cook flame on extra low for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 3 distinctly sized burners (2 of each type) with a staggered array on this unit and that required 6 distinct types of precision machined orifices, such as the ones in this kit. DCS rates the burners at 18,000 BTU, 16,000 BTU and 8,500 BTU. The propane output pressure at the regulator is rated at 10 W. While the Natural Gas setting on this range is rated at 5W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices included as follows for the high flame function: two 1.15 mm (for the high side of burners 4 and 6), two #58 (for the high side of burners 2 and 5), two #70 (for burners 1 and 3). These burner also feature a secondary gas circuit to accommodate a hyper controllable low flame function controlled by low intensity orifices as follows: two #77 (for the low side of burners 2 and 5), two 0.401 mm (for the low side of burners 1 and 3) and two #87 orifices (for the low side of burners 4 and 6). The small simmer orifices produce extremely low, tightly controlled flames that generate approximately 780 BTU (burners 4 and 6), 1750 BTU each (burners 1 and 3) and 2060 BTU (burners 2 and 5) respectively. The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads and they are custom made AND TUNED just for this unit. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual for details. The item “DACOR PROPANE (LP) CONVERSION KIT FOR ER36DSCH RANGE (12 ORIFICES)” is in sale since Monday, November 12, 2018. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
- Brand: Dacor
- Type: Orifice
- MPN: Does Not Apply
Dacor Propane (lp) Conversion Kit For Er48dsch/ng Range (12 Orifices)
November 13, 2018 · Posted in dacor · Comments Off
This kit is intended to specifically convert the DCS model# ER48DSCH range from Natural Gas to Propane (LP). This is a 36 range with fired top side burners and a single electric oven below. These units have an extreme precision specialty burners with that use two orifices each to tailor the cook flame on extra low for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 3 distinctly sized burners (2 of each type) with a staggered array on this unit and that required 6 distinct types of precision machined orifices, such as the ones in this kit. DCS rates the burners at 18,000 BTU, 16,000 BTU and 8,500 BTU. The propane output pressure at the regulator is rated at 10 W. While the Natural Gas setting on this range is rated at 5W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices included as follows for the high flame function: two 1.15 mm (for the high side of burners 4 and 6), two #58 (for the high side of burners 2 and 5), two #70 (for burners 1 and 3). These burner also feature a secondary gas circuit to accommodate a hyper controllable low flame function controlled by low intensity orifices as follows: two #77 (for the low side of burners 2 and 5), two 0.401 mm (for the low side of burners 1 and 3) and two #87 orifices (for the low side of burners 4 and 6). The small simmer orifices produce extremely low, tightly controlled flames that generate approximately 780 BTU (burners 4 and 6), 1750 BTU each (burners 1 and 3) and 2060 BTU (burners 2 and 5) respectively. The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads and they are custom made AND TUNED just for this unit. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual for details. The item “DACOR PROPANE (LP) CONVERSION KIT FOR ER48DSCH/NG RANGE (12 ORIFICES)” is in sale since Monday, November 12, 2018. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
- Brand: Dacor
- Type: Orifice
- MPN: Does Not Apply
Dacor Propane (lp) Conversion Kit For Dyrp48ds/ng Range (orifices And Jets)
November 12, 2018 · Posted in dacor · Comments Off
The DCS model# DYRP48 range is a 48 range with 6 fired top side burners and a single electric oven below. These units have an extreme precision specialty burners with that use two orifices each to tailor the cook flame on extra low for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 2 distinctly sized burners (2 of one type at the front left and front right, and 4 of the other type) that requires 4 distinct types of precision machined orifices, such as the ones in this kit. DCS rates the burners at 18,000 BTU and 15,000 BTU. The propane output pressure at the regulator is rated at 10 W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices included as follows for the high flame function: two #56 (for the high side of the larger front left and front right burners), two #82 (for the low flame of the larger front left and front right burners), four #58 (for high flame on the 4 smaller burners) and four #77 (for the low flame function of the 4 smaller burners). The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads and they are custom made AND TUNED just for this unit. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. The item “DACOR PROPANE (LP) CONVERSION KIT FOR DYRP48DS/NG RANGE (ORIFICES AND JETS)” is in sale since Monday, November 12, 2018. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
- Model: DYRP48
- Type: Orifice
- MPN: Does Not Apply
- Brand: Dacor
- Suitable For: Range
Dacor Propane (lp) Conversion Kit For Er48dsch/ng Range (12 Orifices)
October 14, 2018 · Posted in dacor · Comments Off
This kit is intended to specifically convert the DCS model# ER48DSCH range from Natural Gas to Propane (LP). This is a 36 range with fired top side burners and a single electric oven below. These units have an extreme precision specialty burners with that use two orifices each to tailor the cook flame on extra low for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 3 distinctly sized burners (2 of each type) with a staggered array on this unit and that required 6 distinct types of precision machined orifices, such as the ones in this kit. DCS rates the burners at 18,000 BTU, 16,000 BTU and 8,500 BTU. The propane output pressure at the regulator is rated at 10 W. While the Natural Gas setting on this range is rated at 5W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices included as follows for the high flame function: two 1.15 mm (for the high side of burners 4 and 6), two #58 (for the high side of burners 2 and 5), two #70 (for burners 1 and 3). These burner also feature a secondary gas circuit to accommodate a hyper controllable low flame function controlled by low intensity orifices as follows: two #77 (for the low side of burners 2 and 5), two 0.401 mm (for the low side of burners 1 and 3) and two #87 orifices (for the low side of burners 4 and 6). The small simmer orifices produce extremely low, tightly controlled flames that generate approximately 780 BTU (burners 4 and 6), 1750 BTU each (burners 1 and 3) and 2060 BTU (burners 2 and 5) respectively. The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads and they are custom made AND TUNED just for this unit. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual for details. The item “DACOR PROPANE (LP) CONVERSION KIT FOR ER48DSCH/NG RANGE (12 ORIFICES)” is in sale since Saturday, October 13, 2018. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
- Brand: Dacor
- Type: Orifice
- MPN: Does Not Apply
Dacor Propane (lp) Conversion Kit For Er36dsch Range (12 Orifices)
October 14, 2018 · Posted in dacor · Comments Off
This kit is intended to specifically convert the DCS model# ER36DSCH range from Natural Gas to Propane (LP). This is a 36 range with fired top side burners and a single electric oven below. These units have an extreme precision specialty burners with that use two orifices each to tailor the cook flame on extra low for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 3 distinctly sized burners (2 of each type) with a staggered array on this unit and that required 6 distinct types of precision machined orifices, such as the ones in this kit. DCS rates the burners at 18,000 BTU, 16,000 BTU and 8,500 BTU. The propane output pressure at the regulator is rated at 10 W. While the Natural Gas setting on this range is rated at 5W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices included as follows for the high flame function: two 1.15 mm (for the high side of burners 4 and 6), two #58 (for the high side of burners 2 and 5), two #70 (for burners 1 and 3). These burner also feature a secondary gas circuit to accommodate a hyper controllable low flame function controlled by low intensity orifices as follows: two #77 (for the low side of burners 2 and 5), two 0.401 mm (for the low side of burners 1 and 3) and two #87 orifices (for the low side of burners 4 and 6). The small simmer orifices produce extremely low, tightly controlled flames that generate approximately 780 BTU (burners 4 and 6), 1750 BTU each (burners 1 and 3) and 2060 BTU (burners 2 and 5) respectively. The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads and they are custom made AND TUNED just for this unit. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual for details. The item “DACOR PROPANE (LP) CONVERSION KIT FOR ER36DSCH RANGE (12 ORIFICES)” is in sale since Saturday, October 13, 2018. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
- Brand: Dacor
- Type: Orifice
- MPN: Does Not Apply
Dacor Propane (lp) Conversion Kit For Dyrp48ds/ng Range (orifices And Jets)
October 13, 2018 · Posted in dacor · Comments Off
The DCS model# DYRP48 range is a 48 range with 6 fired top side burners and a single electric oven below. These units have an extreme precision specialty burners with that use two orifices each to tailor the cook flame on extra low for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 2 distinctly sized burners (2 of one type at the front left and front right, and 4 of the other type) that requires 4 distinct types of precision machined orifices, such as the ones in this kit. DCS rates the burners at 18,000 BTU and 15,000 BTU. The propane output pressure at the regulator is rated at 10 W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices included as follows for the high flame function: two #56 (for the high side of the larger front left and front right burners), two #82 (for the low flame of the larger front left and front right burners), four #58 (for high flame on the 4 smaller burners) and four #77 (for the low flame function of the 4 smaller burners). The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads and they are custom made AND TUNED just for this unit. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. The item “DACOR PROPANE (LP) CONVERSION KIT FOR DYRP48DS/NG RANGE (ORIFICES AND JETS)” is in sale since Saturday, October 13, 2018. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
- Model: DYRP48
- Type: Orifice
- MPN: Does Not Apply
- Brand: Dacor
- Suitable For: Range
