Dcs Rg-488 Propane Range Conversion Kit All 17 Orifices
August 21, 2017 · Posted in rg-488 · Comments Off
This listing is specifically for the DCS-488 range to convert the unit for use with propane. Size is 1/8 27 threads. Don’t let the gas size confuse you, the actual size of the female threads is 3/8-inch (see pic). Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory guide is included. This set includes 17 orifices for a stove with up to 17 burners to convert this unit from natural gas to propane. This kit includes orfices for all 6 open top burners (2 for each 16,000 BTU burner which is actually divided into two parts for each burner; 6 for the middle stove top simmer burners which require long shank #80 orifices and 6 for the outer stove top burners which require #57 orifices), one #55 orifice for the grill (or griddle -depends on your set up) of 18,000 BTU, one #51 orifice for the main oven with 30,000 BTU, one #55 orifice for the 12 inch warming oven of 18,000 BTU, one #55 orifice for the broiler of 19,000 BTU and another # 56 orifice for the RGA broiler of 16,000 BTU. The stock manifold output pressure for propane must be factory spec at 10.0 W. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator. The item “DCS RG-488 PROPANE RANGE CONVERSION KIT ALL 17 ORIFICES” is in sale since Sunday, July 30, 2017. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped worldwide.
- Brand: DCS
- MPN: Does Not Apply
Dcs Rgs-485 Propane Range Conversion Kit All 15 Orifices
August 21, 2017 · Posted in rgs-485 · Comments Off
This listing is specifically for the DCS-RGS-485GD range to convert the unit for use with propane. Other DCS range kits are available. Size of rearmost orifices is 1/8 27 threads, and the size of front (larger) orifices is 5.89 mm (standard equivalent of 0.233 inch or nearly 1/4 inch) and the size of the smaller orifice for the inner (low intensity) burner is 3.0 mm. Don’t let the gas size confuse you, the actual size of the female threads is 3/8-inch (see pic) on the bigger orifices. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory conversion guide is included. This set includes 15 orifices for a stove with up to 15 burners to convert this unit from natural gas to propane. This kit includes orfices for all 5 open top burners (2 for each 15,000 BTU open top burner which is actually divided into two parts for each burner; 5 for the middle stove top simmer burners which require #80 orifices and 5 for the outer stove top burners which require #56 orifices), two #58 orifice for the griddle (or grille -depends on your set up) of 24,000 BTU, one #51 orifice for the main oven with 30,000 BTU, one #55 orifice for the 12 inch warming oven of 18,000 BTU, and one #55 orifice for the broiler of 19,000 BTU. The stock manifold output pressure for propane must be factory spec at 10.0 W. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator. The item “DCS RGS-485 PROPANE RANGE CONVERSION KIT ALL 15 ORIFICES” is in sale since Sunday, July 30, 2017. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped worldwide.
- Brand: DCS
- MPN: Does Not Apply
Dacor Propane Conversion Kit For Er48ds 48 Range (10 Orifices)
August 20, 2017 · Posted in dacor · Comments Off
The DCS model# ER48DS range is a 48 range with fired top side burners and two electric ovens below. Four burners have inner and outer burner rings; the inner is used for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 3 distinctly sized burners on this unit and 4 of them have low intensity and high intensity burner functions. The large burners and the small burners are the ones with a simmer function, while the mid sized burners DO NOT have a simmer function. DCS rates the burners at 18,000 BTU, 16,000 BTU and 8,500 BTU. The propane output pressure at the regulator is rated at 10 W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices for the standard burners will be bored as follows: large burners #56, medium burners #58, and small burners #70. The 2 large 18,000 BTU burners have small simmer burner rings at their centers and the 2 small 8,500 BTU burners also have small simmer burner rings at their centers. The small simmer burners produce approximately 1,700 BTU and 2,000 BTU each, so the size of each orifice is #78 and #77 respectively. The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. The item “DACOR PROPANE CONVERSION KIT FOR ER48DS 48 RANGE (10 ORIFICES)” is in sale since Sunday, August 06, 2017. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
- Brand: Dacor
- Type: Orifice
- MPN: Does Not Apply
Amana Range Lp Gas Conversion
August 5, 2017 · Posted in amana · Comments Off
Dacor Propane Conversion Kit For Er48ds 48 Range (10 Orifices)
July 18, 2017 · Posted in dacor · Comments Off
The DCS model# ER48DS range is a 48 range with fired top side burners and two electric ovens below. Four burners have inner and outer burner rings; the inner is used for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 3 distinctly sized burners on this unit and 4 of them have low intensity and high intensity burner functions. The large burners and the small burners are the ones with a simmer function, while the mid sized burners DO NOT have a simmer function. DCS rates the burners at 18,000 BTU, 16,000 BTU and 8,500 BTU. The propane output pressure at the regulator is rated at 10 W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices for the standard burners will be bored as follows: large burners #56, medium burners #58, and small burners #70. The 2 large 18,000 BTU burners have small simmer burner rings at their centers and the 2 small 8,500 BTU burners also have small simmer burner rings at their centers. The small simmer burners produce approximately 1,700 BTU and 2,000 BTU each, so the size of each orifice is #78 and #77 respectively. The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. The item “DACOR PROPANE CONVERSION KIT FOR ER48DS 48 RANGE (10 ORIFICES)” is in sale since Tuesday, July 04, 2017. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.
- Brand: Dacor
- Type: Orifice
- MPN: Does Not Apply
Blue Seal 231910 Nat To Lp Lpg Gas Conversion Kit Natural Propane G506 Range
June 30, 2017 · Posted in blue · Comments Off
BLUE SEAL Part Number: 231910 NAT GAS TO LPG CONVERSION KIT FOR OVEN. This fixed price listing is for 1 x NAT to LPG Conversion Kit. As shown in the picture below. Suitable for models of Blue Seal including the G506 Series. If you require any other spare parts or accessories for your appliance visit the Blue Seal. To see our huge range of catering parts. All of our parts are sent out same day from our own warehouse stock. We do advise that any parts are diagnosed, installed and tested by a suitably qualified engineer. Please see our other items for more spare parts related to this listing. We are an established Vat registered, limited company with an enviable reputation to protect (no dodgy second hand faulty, stolen or recalled products found here). Our prices INCLUDE VAT (no hidden extras). At the feedback left by 1000′s of other satisfied customers. You will not be disappointed. Catering Parts UK stock a huge line of spare parts to suit all gas and electrical commercial catering equipment, refrigeration equipment, dishwashers and glass washers. See our shop listings for current special offers and clearance items. We are easily accessible located near the M1/M62 interchange. CATERING PARTS UK Unit 2, Newton House, Grey Street, Wakefield, West Yorkshire WF1 3HQ. We ask that you include a contact telephone number when completing the sale for us to place on the couriers manifest, our couriers will not take parcels without a contact number. A signature is required for each parcel. Please unpack and check all items before signing for them, we can not be held responsible for any items that have been signed for as ok and then later reported as damaged. OTHER INFORMATION Many of the parts on sale are supplied by the original equipment manufacturers (OEM) whilst others are offered as suitable replacements or alternatives. Parts supplied as alternatives may differ from the OEM’s exact specifications. Any pictures shown are stock photo’s and exact colours or shades may vary from the picture. The item “BLUE SEAL 231910 NAT TO LP LPG GAS CONVERSION KIT NATURAL PROPANE G506 RANGE” is in sale since Monday, March 06, 2017. This item is in the category “Business, Office & Industrial\Restaurant & Catering\Kitchen Equipment & Units\Fryers”. The seller is “cateringparts” and is located in Wakefield. This item can be shipped worldwide.
- Brand: Blue Seal
- Type: Kitchen Equipment
- Sub-Type: Fryers
- MPN: 231910
Kenmore Range Oven LP Liquid Propane Conversion Kit 80880910 316039609
June 4, 2017 · Posted in kenmore · Comments Off
Kenmore Range Oven LP Liquid Propane Conversion Kit 80880910 316039609. Part Number 80880910 (AP2162652) replaces 316039615, 723434, 80-880910, AH479287, EA479287, PS479287. The item “Kenmore Range Oven LP Liquid Propane Conversion Kit 80880910 316039609″ is in sale since Tuesday, April 25, 2017. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “doctor-fridge” and is located in Las Vegas, Nevada. This item can be shipped worldwide.
- Type: P Liquid Propane Conversion Kit
- Brand: Kenmore
- MPN: 80880910 316039609
- Color: Multi-Color
- Model: 79075762001
Lg Range Model Ldg4313st How To Convert To Lp
May 18, 2017 · Posted in range · Comments Off
Dcs Rgs-485 Propane Range Conversion Kit All 15 Orifices
April 26, 2017 · Posted in rgs-485 · Comments Off
This listing is specifically for the DCS-RGS-485GD range to convert the unit for use with propane. Other DCS range kits are available. Size of rearmost orifices is 1/8 27 threads, and the size of front (larger) orifices is 5.89 mm (standard equivalent of 0.233 inch or nearly 1/4 inch) and the size of the smaller orifice for the inner (low intensity) burner is 3.0 mm. Don’t let the gas size confuse you, the actual size of the female threads is 3/8-inch (see pic) on the bigger orifices. Many cooktops, free standing stoves and rangetops use these types of orifices and they will retrofit a number of other units which use burner assemblies with mixer tubes that fit over hooded orifices. A comprehensive factory conversion guide is included. This set includes 15 orifices for a stove with up to 15 burners to convert this unit from natural gas to propane. This kit includes orfices for all 5 open top burners (2 for each 15,000 BTU open top burner which is actually divided into two parts for each burner; 5 for the middle stove top simmer burners which require #80 orifices and 5 for the outer stove top burners which require #56 orifices), two #58 orifice for the griddle (or grille -depends on your set up) of 24,000 BTU, one #51 orifice for the main oven with 30,000 BTU, one #55 orifice for the 12 inch warming oven of 18,000 BTU, and one #55 orifice for the broiler of 19,000 BTU. The stock manifold output pressure for propane must be factory spec at 10.0 W. Contact me if your regulators output pressure is different. Many cooktops, rangetops and free standing stoves usually come with a dual gas regulator that can be converted between natural gas and propane. Other manual adjustments might be necessary, so check your factory instruction manual details. No other hardware parts should be required to complete the conversion if your unit uses a dual gas regulator. The item “DCS RGS-485 PROPANE RANGE CONVERSION KIT ALL 15 ORIFICES” is in sale since Wednesday, April 26, 2017. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped worldwide.
- Brand: DCS
- MPN: Does Not Apply
Dcs Propane Conversion Kit For Er48ds 48 Range (10 Orifices)
April 1, 2017 · Posted in propane · Comments Off
The DCS model# ER48DS range is a 48 range with fired top side burners and two electric ovens below. Four burners have inner and outer burner rings; the inner is used for cooking delicate sauces or simmering, while the outer is used for high intensity heated cooking. There are 3 distinctly sized burners on this unit and 4 of them have low intensity and high intensity burner functions. The large burners and the small burners are the ones with a simmer function, while the mid sized burners DO NOT have a simmer function. DCS rates the burners at 18,000 BTU, 16,000 BTU and 8,500 BTU. The propane output pressure at the regulator is rated at 10 W. This kit features orifices that are specifically bored to match the heat ratings of the burners mentioned above, so make sure your unit matches this model number with these specs. Orifices for the standard burners will be bored as follows: large burners #56, medium burners #58, and small burners #70. The 2 large 18,000 BTU burners have small simmer burner rings at their centers and the 2 small 8,500 BTU burners also have small simmer burner rings at their centers. The small simmer burners produce approximately 1,700 BTU and 2,000 BTU each, so the size of each orifice is #78 and #77 respectively. The size of these orifices is 5.92 mm outside thread measurement as shown (standard equivalent of 0.233 inch or nearly 1/4 inch) at the outside of the threads. Make sure to measure your orifices carefully before ordering. It is usually necessary to convert the regulator as part of the conversion. Other manual adjustments might be necessary, so check your factory instruction manual details. The item “DCS PROPANE CONVERSION KIT FOR ER48DS 48 RANGE (10 ORIFICES)” is in sale since Saturday, April 01, 2017. This item is in the category “Home & Garden\Major Appliances\Ranges & Cooking Appliances\Parts & Accessories”. The seller is “frankhhop” and is located in Orange, California. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, BR, CL, CO, CR, DO, PA, TT, GT, SV, HN, JM.
- Brand: DCS
- Type: Orifice
- MPN: Does Not Apply
